Quality, Inovation, Technology

Quality Systems Registrar
ISO 9001: 2008
Certificate QSR-213

Isovolta Inc. is ISO 9001/2008 certified and maintains a high level of Quality Management.

With customer service second to none, Isovolta Inc. has an excellent reputation for delivering quality products, on time with superb quality consistance. Over the years, Isovolta Inc. has established a strong record of VPI technology. They have developed several specific VPI products to meet the demanding needs of the high voltage electrical industry. One example is a mica tape with a very flexible B-stage resin incorporated in the tape. This breakthrough technology in flexible B-stage tapes assisted greatly in improving productivity and performance at several of the major coil manufactureres.

The Isovolta Inc. testing capabilities, all located at the facility laboratories in Rutland, to support customer insulation systems for low, medium and high voltage applications can be summarized as follows:

  1. Straight bar machine taping.
  2. VPI processing : Monitor impregnation and cure with bridge.
  3. Press bar processing : Monitor press cure with bridge
  4. Aging ovens to determine weight loss: Resins and composites
  5. Tetex bridge : Dissipation factor at RT and elevated temperature
  6. Wayne Kerr Bridge : DF and Capacitance @ 100 / 400 / 1000 / 10000 Hz
  7. Phoenix power supplies : Hipot and Voltage endurance at RT and elevated temperature.

      IEEE1043 using ovens.
  8. DC leakage test
  9. Instron for Tensile and Flexural measurements
10. Gurley Hill flexibility tester
11. Air porosity measurement
12. Williams penetration test
13. High temperature furnace for ignition weight loss measurements
14. Microscope analysis
15. Pilot Coater : Allows for quick redesign or development of coated materials and mica tapes.
16. We also utilize the ISOVOLTA Group test laboratories in Werndorf, Austria and if needed outside laboratories       to conduct tests we are not specifically set up for.
17. On Site manufacture of specialty Mica papers.

With our technical staff, we can help our customers develop and test out new ideas and concepts. We will also assist them to adapt existing or newly developed products to their manufacturing process. This helps optimize both performance and cost.